FREESTYLE BIKES SE Racing Perry Kramer PK Ripper 27.5+ BMX Bike-Silver

When the original PK Ripper burst onto the scene in 1979, it took the BMX world by storm & set a new benchmark for radness. Here we are now 40+ years later and it’s happening again with the new SE Racing 2020 Perry Kramer PK Ripper 27.5+ BMX Bike-Silver, designed by the man himself, the PK of “PK Ripper”, Perry Kramer. This ultra-cool bike features tubeless ready 27.5” x 2.5” Vee Speedster tires, sealed internal headset, internal cable routing, SRAM Level hydraulic disk brakes, Oakley B-1B grips, and of course Perry’s stamp of approval. This is the PK of the future!

KEY FEATURES

• Perry Kramer replica 6061 aluminum PK Ripper frame w/ floval tubing, seatstays wrap, internal cable routing, and looptail rear end
• Full Cr-Mo Landing Gear forks with disc tabs
• SE Racing forged alloy 2-piece cranks with 24mm hollow alloy spindle, external sealed bearing bottom bracket and alloy chainring
• SRAM Level hydraulic disc brakes with 2-piston caliper and SRAM Direct Link levers
• Tubeless compatible Alex DP30 rims with Vee Speedster 27.5 x 2.5” tires, tubeless valves and tubeless rim tape included.
• Oakley B-1B Grips with Perry Kramer Donuts
• Perry Kramer Flyer Seat with SE bottle opener
• SE Racing snap padset
• Custom Perry Kramer PK Ripper sticker sheet
• 31.2 pounds

SPECIFICATIONS

• SUGGESTED RIDER SIZE: 5’3″+ (160cm+)
• COLOR(S): High Polish Silver
• FRAME: 6061 Aluminum Floval Tubing, Internally-machined Integrated Head Tube, Symmetrical Looptail Rear End, 73mm Euro Bottom Bracket, 142mm Spaced Dropouts, Internal Cable Routing on Top Tube, Disc Brake Tabs
• FORK: Landing Gear, Full Cr-Mo, 419mm Axle to Crown, 29mm Offset, 110mm Spaced Dropouts
• CRANKSET: SE Racing 175mm Forged Alloy 2-pc Cranks, External Sealed Euro Bottom Bracket, 24mm Hollow Alloy Spindle, 39T Alloy Chainring
• PEDALS: X-Pedo Low-profile Platform w/ Removable Pins
• CHAIN: KMC S1
• WHEELSET: Alloy 36H Nutted Hubs, Sealed Rear, 110mm Front Hub & 142mm Rear Hub, w/ Alex DP30 Tubeless Compatible, Double-Wall Disc Rims, 17T Cassette, Stainless Spokes, Tubeless Valves, Tubeless Rim Tape
• TIRES: Vee Tire Co x SE Racing Speedster, Tubeless Ready, Folding, 72TPI, 27.5 x 2.5″ Front & Rear
• BRAKESET: SRAM Level, Hydraulic Disc, 2-Piston Caliper, 160mm Rotor, Expandable Bladder, Timing Port Closure, DOT 5.1 Fluid
• BRAKE LEVERS: SRAM Direct Link Level, Alloy
• HEADSET: FSA Orbit CE, Sealed 1-1/8″ Integrated
• HANDLEBAR: Big Honkin’ Cr-Mo Cruiser Bar, 29″ x 7″, 12° Backsweep, 2° Upsweep
• STEM: Retro Alloy Top-Load w/ Engraved SE Logo on Top & Sides, 55mm Reach
• GRIPS: Oakley B-1B, Made in USA, w/ Perry Kramer Donuts
• SEAT: Perry Kramer SE Flyer Seat w/ Custom SE Bottle Opener Brace
• SEATPOST: Micro-Adjust Alloy, 27.2mm
• SEAT CLAMP: Promax Quick Release Seat Clamp, 31.8mm Inner Diameter
• ACCESSORIES: SE Racing Snap Padset, Alloy Valve Caps, Custom Perry Kramer PK Ripper 27.5 Sticker Sheet, SE Chain Tensioners, Tubeless Valves, Tubeless Rim Tape
• WEIGHT: 33.1 lbs / 15.01 kgs

*Specifications subject to change without notice

GEOMETRY

• TOP TUBE, ACTUAL: 22.8″
• SEAT TUBE, CENTER TO TOP: 15.7″
• SEAT TUBE ANGLE: 73°
• HEAD TUBE ANGLE: 71°
• CHAINSTAY LENGTH: 17.4″
• WHEELBASE: 42.7″
• BOTTOM BRACKET HEIGHT: 11.9″
• STANDOVER: 29.5″
• STEM: 55mm
• HANDLEBAR WIDTH: 29″
• CRANK: 175mm
• WHEEL SIZE: 27.5
• SEAT POST DIAMETER: 27.2mm