CHASE BICYCLES RACE BIKES Chase Edge Pro XL Bike-Blue

For 2019 the Chase Edge line of race bikes were upgraded with a new Triple butted Premium Ultralight Alloy Hydroformed tubed frame. The Edge has some of the best parts on a complete BMX race bike, including a new Chase rear cassette hub, Tioga Tires, Tektro brake set, Insight chainring, grips, chain tensioners, KMC Chain, and a Pivotal seat / seat post, all help round out the Edge to make it one of the most dialed in complete bikes in BMX. Edge out the competition on and off the track with the new 2019 Chase Edge complete race bike!

WEIGHT : 21.5 LBS / 9,51 KG WITHOUT PEDAL
RIDER SIZE : 5’7″ – 5’11” / 1M70 – 1M80

KEY FEATURES

FRAME : Chase Edge Pro XL 21″ Top Tube Triple Butted Hydroformed
FORK : Chase Edge Full Cr-mo Fork, 1-1/8″ Steer Tube
HEADSET : Integrated 1-1/8″ Sealed Bearing
CHAINRING : Insight 44 Teeth 4 Bolts 104mm
CRANKSET : Chase Edge Alloy 180mm
HUBS : Double Contact Seals Bearings Front, Sealed Cartridge Bearing Rear, Steel Cassette Body, 4 Pawls, 96 Points Of Engagement, 16T cog
RIMS : Chase Edge 175 Double Wall 20″x1.75″, 36H Front & Rear
TIRES : Tioga PowerBand 20×1.85″ Front and PowerBlock 20×1.60″ Rear
BRAKES : Tektro

GEOMETRY

TOP TUBE: 21″ (533.4mm)
REAR CHAINSTAY MINIMUM: 14.15″ (359.4mm)
DROPOUT LENGTH: 1.8″ (46mm)
SEAT TUBE ANGLE: 72°
HEAD TUBE ANGLE: 74°
BOTTOM BRACKET HEIGTH: 11.5″ (292.1mm)

FRAME	Chase Edge Pro XL 21″ Top Tube 6061 T6 Alloy Triple Butted Hydroformed, Integrated Head Tube, 1-1/8″, Water Decals
FORK	Chase Edge Full Cr-mo, 1-1/8″ Steer Tube With Tapered Blades
HEADSET	Integrated Sealed Bearing
HANDLEBAR	Chase Edge Bar 8″ Rise, 12° Back Sweep & 1° Up Sweep
GRIPS	Insight C.O.G.S 145mm Alloy Clamps Laser Etched Logo, PVC End Plug
STEM	Chase Edge 50mm 6061 T6 Alloy Laser Etched Logo
BB	118mm Sealed Cartridge Isis BB
CHAINRING	Insight 44 Tooth 4 Bolts 104mm 1/2″x3/32″ 5mm Alloy Ring
CRANK	Chase Edge 3 Piece Crank 180mm Alloy Arm With Laser Etched Logo, Cr-mo Chain Ring Bolts / Nuts
PEDAL	Platform Pedal 9/16″
CHAIN	KMC Z33 1/2″x3/32″
COG	16 Tooth
FRONT HUB	Pro Hub, 36H, Double Contact Seals Bearing with Dust Caps, 3/8″ Axle/Nuts
REAR HUB	36H, Sealed Cartridge Bearings with Dust Caps, 3/8″ Axle/Nuts, Steel Cassette Body, 4 Pawls, 96 Points Of Engagement
SPOKES	14 Gauge
NIPPLES	Brass Nipples
FRONT RIM	Chase Edge 175 Double Wall 36H 20″x1.75″ Schrader Valve
REAR RIM	Chase Edge 175 Double Wall 36H 20″x1.75″ Schrader Valve
FRONT TIRE	Tioga PowerBand 20″x1.85″
REAR TIRE	Tioga PowerBlock 20″x1.60″
TUBES	20”x1.50″-1.75″ Schrader Valve
BRAKE LEVER	Tektro ML520
BRAKE CALIPER	Tektro 837AL
SADDLE	Pro Pivotal
SEAT POST	Pivotal 27.2x250mm Polished Alloy
SEAT CLAMP	Chase Edge QR Alloy 31.8mm
CHAIN TENSIONNER	Insight Twin Hole Laser Etched Logo